Blockter's purchase attention point

Dec 11, 2018

Leave a message

(1) The quality grade of blockboard is divided into superior products, first-class products and qualified products. Before the blockboard is shipped from the factory, a non-fading ink mark should be placed on the lower right corner of each board to indicate the product category, grade, manufacturer code, and inspector code; the category mark should indicate the indoor and outdoor words. If this information is not or is not clear, consumers should pay attention.


(2) Appearance observation, select the plate with smooth surface, nodules and less skin; observe whether the plate surface is uplifted, curved, with or without drums, dents, etc.; observe whether there is no glue or greasy putty around the plate. Check if the core strips are even and tidy, and the smaller the gap, the better. The width of the core should not exceed 2.5 times the thickness, otherwise it will be easily deformed.


(3) Touch with your hand, spread the palm of your hand, gently smooth the surface of the wood core board. If you feel the burrs, it means the quality is not high.


(4) Lift the side of the blockboard with both hands, shake it up and down, and listen to whether there is sound of tensile fracture of the wood. Otherwise, the internal gap is large and there are more voids. High quality blockboard should have a sense of overallity and weight.


(5) After sawing the waist from the side, observe whether the wood quality of the core is even and tidy, whether there is decay, breakage, wormhole, etc., whether the gap between the solid wood strips is large.


(6) Place the nose close to the section of the blockboard and smell it for a strong pungent smell. If the blockboard emits a fragrant smell of wood, it means that the amount of formaldehyde released is small; if the smell is pungent, it means that the amount of formaldehyde is released, or do not buy it.


(7) After the purchase, pay attention to check whether the blockboard of the loading is consistent with the sample seen at the time of loading, and prevent unscrupulous merchants from “stealing the column”.


(8) It is necessary to prevent individual merchants from intentionally confusing the boundaries of E1 and E2 in order to sell counterfeit products. Blockboard is divided into two categories, E 1 and E 2 according to the limit of harmful substances. The harmful substances are mainly formaldehyde. Home decoration can only use E1 boardboard, E2 grade blockboard even if it is a qualified product, its formaldehyde content may be more than three times more than E1 grade core board.


(9) Request documents such as blockboard inspection report and quality inspection certificate from the merchant. The formaldehyde content of the blockboard should not be greater than 1. If you want 5mg/L, it can be used directly indoors, and the blockboard with formaldehyde content not more than 5mg/L must be finished after being treated. Therefore, when buying, be sure to ask if it meets the national interior decoration materials standards and indicate on the invoice.


Send Inquiry