The blockboard has good screw strength, high strength, good quality, sound absorption, heat insulation, etc., and the water content is not high, between 10% and 13%, the processing is simple and the most widely used.
Blockboard is more stable than solid wood, but it is afraid of moisture. It should be avoided in the kitchen during construction.
The processing technology of blockboard is divided into two types: machine and hand. Hand-made is to manually insert the wooden strip into the splint. The wooden strip is subjected to less pressing force, uneven splicing, large gap, poor nail holding force, and cannot be sawed and processed. It is only suitable for sub-projects of partial decoration. Such as the solid wood floor cushion board and so on. The plate of the machine is subjected to a large pressing force, the gap is extremely small, the splicing is flat, the bearing capacity is uniform, long-term use, compact structure and not easy to deform.
Different materials, different quality, large core board according to the quality of the material and the texture of the surface material is divided into "excellent products", "first-class products" and "qualified products." There are also companies that mark the grades of grades A, double A and triple A, but this is only corporate behavior, which is inconsistent with national standards, and such markings are not allowed on the market.
There are many kinds of wood core boards, such as poplar, birch, pine, paulownia, etc. Among them, poplar and birch are the best, the texture is dense, the wood is not soft and hard, the nail holding power is strong, and it is not easy to be deformed, and the paulownia The texture is very light, soft, absorbs large moisture, has poor nail holding power, and is not easy to dry. During the use of the produced sheet, when the water evaporates, the sheet is easy to dry and deform. The loose wood is hard, not easy to press, the splicing structure is not good, the nail holding power is poor, and the deformation coefficient is large.
